Challenge/Problem/Issue
Exemplifying manufacturing excellence, one of the a world’s leading manufacturer of interior doors, entry doors, french doors and glass doors felt it important to address the scratches and dents being caused by the forklifts transporting their product throughout the production facility and shipping area. The challenge was to find a process improvement that could realistically and economically prove effective, and increase the volume of quality going out the door.
Solution
Having heard of the new innovative bumper system developed by Kastalon, the plant management enlisted our assistance in matching the right bumper for the application. Kastalon recommended a soft grade Fork-Kushion® to absorb the doors impact while providing a non-scratching, non-marring surface for the doors to rest as the load is shifted back on the forks.
Customer Value
Customer immediately saw a reduction in their damage. The improvement not only saved significant dollars in the time and material used to touch-up and repair the damage, but it also improved the shipment times. Within 30 days, the reduction in damage was so significant that management issued a mandate that all forklift trucks be outfitted with a set of Fork-Kushions.
Sunday, June 21, 2009
Fork-Kushions® - Siding Manufacturer
Challenge/Problem/Issue
A quality control supervisor of a globally recognized manufacturer of engineered wood siding was continually experiencing significant damage caused by their forklifts picking up bundles of siding. Unique to the industry, their siding boards are denser and more rigid than traditional strand board siding, however, this rigidness also makes the sharp edge more susceptible to damage when coming in contact with the back of a lift truck. As a result, the supervisor searched for possible solutions.
Solution
Upon investigation, the supervisor learned of a revolutionary forklift bumper system called Fork-Kushions® that had proven to provide impressive damage control. Due to the sharp edge of the siding, it was determined that the “cut-resistant” style with its durable outer surface and it’s shock absorbent center would be the best fit to test against their application.
Customer Value
After 2 weeks of putting the Bumper into service they saw a 30% reduction in Broken Board. There was also a reduction in Siding interlocking with itself when the forklift picked up the tiers of newly milled siding. Although this was not a defect, it did cause safety and ergonomic issues and was greatly reduced by using the bumpers. The only concern they had was that they were going to have to purchase a longer fork for the forklifts to make up for the 1 1/2" they lost for the bumper and it's bracket.
After a full 3 months in service, the Fork-Kushions combined with the hydraulic carriage dampers for the fork lifts resulted in about an impressive 60% reduction of in process damaged board.
A quality control supervisor of a globally recognized manufacturer of engineered wood siding was continually experiencing significant damage caused by their forklifts picking up bundles of siding. Unique to the industry, their siding boards are denser and more rigid than traditional strand board siding, however, this rigidness also makes the sharp edge more susceptible to damage when coming in contact with the back of a lift truck. As a result, the supervisor searched for possible solutions.
Solution
Upon investigation, the supervisor learned of a revolutionary forklift bumper system called Fork-Kushions® that had proven to provide impressive damage control. Due to the sharp edge of the siding, it was determined that the “cut-resistant” style with its durable outer surface and it’s shock absorbent center would be the best fit to test against their application.
Customer Value
After 2 weeks of putting the Bumper into service they saw a 30% reduction in Broken Board. There was also a reduction in Siding interlocking with itself when the forklift picked up the tiers of newly milled siding. Although this was not a defect, it did cause safety and ergonomic issues and was greatly reduced by using the bumpers. The only concern they had was that they were going to have to purchase a longer fork for the forklifts to make up for the 1 1/2" they lost for the bumper and it's bracket.
After a full 3 months in service, the Fork-Kushions combined with the hydraulic carriage dampers for the fork lifts resulted in about an impressive 60% reduction of in process damaged board.
Koat-A-Roll - Doncaster Gear Products
Challenge/Problem/Issue
Doncaster Gear Products specialize in forging and machining their own gears. As part of the forging process, they blast many different parts. For this process they make steel fixtures to set the parts on as they are fed into the automatic blaster. These fixtures represent a significant investment as hundreds are made annually, however, the blaster wears them away over time.
Solution
Attempting to find a way to give these fixtures a longer life, Doncaster Gear purchased Koat-A-Roll® polyurethane sleeves to put over the fixtures. Although not a standard application for Koat-A-Roll conveyer roller sleeves, the exception wear properties of the material and the cylindrical shape made it a perfect fit.
Customer Value
Within the first year, Doncaster realized a $2,000-$3,000 savings in material and machining cost. According to Dave Quarnstrom, “Although this is an unconventional use of the product, it was a great investment.”
Doncaster Gear Products specialize in forging and machining their own gears. As part of the forging process, they blast many different parts. For this process they make steel fixtures to set the parts on as they are fed into the automatic blaster. These fixtures represent a significant investment as hundreds are made annually, however, the blaster wears them away over time.
Solution
Attempting to find a way to give these fixtures a longer life, Doncaster Gear purchased Koat-A-Roll® polyurethane sleeves to put over the fixtures. Although not a standard application for Koat-A-Roll conveyer roller sleeves, the exception wear properties of the material and the cylindrical shape made it a perfect fit.
Customer Value
Within the first year, Doncaster realized a $2,000-$3,000 savings in material and machining cost. According to Dave Quarnstrom, “Although this is an unconventional use of the product, it was a great investment.”
Filler Plates - Cargill Steel
Challenge/Problem/Issue
As the global demand continues to grow for light gauge metals in the automotive, appliance and building material markets, the metal coil processors must adapt to the unique challenges of producing surface-sensitive materials.
Because the pre-finished metal surface is more susceptible to scratches or damage, they must pay extra attention to the equipment and the handling of the coils.
Solution
Cargill Steel, East Chicago addressed their desire to successfully process light gauge materials by purchasing a new re-coiler reel for this application. Unfortunately, they continued to experience creasing, “head-in” damage, and marks on their finished product. They made several process changes as well as modifications to the reel but could not obtain an end product that they believed would be acceptable to the market that they were trying to attract. As a result, they moved away from those customers.
Cargill Steel started investigating ways to eliminate the damage they were experiencing and sought the assistance of Kastalon Polyurethane Products, who are well known for their coil protection solutions. After many months of design and engineering reviews, Kastalon made the recommendation to outfit the reel with a multi-segment bolt-on set of engineered polyurethane filler plates.
Once the filler plates were installed and put into service, several different gauges were run. The first was a .070/.071 thickness. This coil ran twice through the line and re-coiled twice on the filler plates. No markings could be felt. The second coil run was considered light gauge at .017 thickness. This coil also ran through the line and re-coiled twice on the filler plates. Again, the Quality Control Supervisor reported no marks.
Customer Value
The success of these coils has since allowed Cargill Steel to go after the light gauge market. In addition to the added business opportunity, the Kastalon Polyurethane Filler Plates are far lighter than steel, thereby allowing for faster change-outs and reduced maintenance costs have further improved operating efficiencies.
As the global demand continues to grow for light gauge metals in the automotive, appliance and building material markets, the metal coil processors must adapt to the unique challenges of producing surface-sensitive materials.
Because the pre-finished metal surface is more susceptible to scratches or damage, they must pay extra attention to the equipment and the handling of the coils.
Solution
Cargill Steel, East Chicago addressed their desire to successfully process light gauge materials by purchasing a new re-coiler reel for this application. Unfortunately, they continued to experience creasing, “head-in” damage, and marks on their finished product. They made several process changes as well as modifications to the reel but could not obtain an end product that they believed would be acceptable to the market that they were trying to attract. As a result, they moved away from those customers.
Cargill Steel started investigating ways to eliminate the damage they were experiencing and sought the assistance of Kastalon Polyurethane Products, who are well known for their coil protection solutions. After many months of design and engineering reviews, Kastalon made the recommendation to outfit the reel with a multi-segment bolt-on set of engineered polyurethane filler plates.
Once the filler plates were installed and put into service, several different gauges were run. The first was a .070/.071 thickness. This coil ran twice through the line and re-coiled twice on the filler plates. No markings could be felt. The second coil run was considered light gauge at .017 thickness. This coil also ran through the line and re-coiled twice on the filler plates. Again, the Quality Control Supervisor reported no marks.
Customer Value
The success of these coils has since allowed Cargill Steel to go after the light gauge market. In addition to the added business opportunity, the Kastalon Polyurethane Filler Plates are far lighter than steel, thereby allowing for faster change-outs and reduced maintenance costs have further improved operating efficiencies.
Subscribe to:
Comments (Atom)